<menuitem id="omwf0"><dfn id="omwf0"></dfn></menuitem><xmp id="omwf0"><bdo id="omwf0"></bdo></xmp>
  • <bdo id="omwf0"><optgroup id="omwf0"></optgroup></bdo>
    1. <track id="omwf0"></track>
      <bdo id="omwf0"></bdo>
      文章詳情

      Vacuum Fixture ICt System

      • 產品名稱:Vacuum Fixture ICt System
      • 產品型號:TR-3 vacuum system
      • 產品廠商:checksum
      • 產品文檔:
      你添加了1件商品 查看購物車
      簡單介紹
      Vacuum Fixture System Overview The CheckSum TR-3-Console Fixture System allows CheckSum Test Systems to be interfaced to the unit-under-test (UUT) via a Bedof-Nails Vacuum Fixture system. The Test System electronics are connected to the receiver with the standard system cables. This carries the signals to receiver pin blocks which have spring probes that provide a reliable interface to the easil

      Vacuum Fixture ICt System

      的詳細介紹

       Overview

      ? Bed-of-Nails Fixture System 

      ? Industry-Standard GR 2270-style Receiver 

      ? 1500 Test System Connections

       ? Automated Vacuum Control Valve 

      ? Vacuum Gauge

       ? Low Cost 

      ? Compatible with CheckSum Testers and MultiWriter? part programming 

      APPCTIONS:

      The receiver assembly accommodates up to 1500 test points and uses industry-standard GenRad 2270-compatible test head kits. The system provides for connection of your vacuum  system pump via a 1? inch hose connection.  The system has an automatic control valve that can is typically remotely controlled by the test program.
      All 1500 test point receiver pin-blocks and cables are included in receiver section.  This eliminates the need to add any receiver parts in the future.  CheckSum modules that are included in the shipment are pre-wired to the receiver.  Additional modules can be added in the future and connected on-site to the available receiver pin-blocks.

      Abbreviated Speci? cations
      Test heads can be obtained locally and customized for your speci? c application, or kits can be purchased directly from CheckSum. The Model TR-3-1620 is 16 x 20 inches (40.6 x 50.8 cm) and the Model TR-3-2024 is 20 x 24 inches (50.8 x 60.96 cm). For each 150 test points used for testing, a Model TR-3-2 Interface Block is required in the test head. CheckSum can also provide complete custom ? xturing solutions or provide referrals


      Features 

      ? Industry standard bed-of-nails ? xturing platform supports ?xture development from multiple, worldwide vendors

       ? Small system ? oor space footprint 

      ? Fixture receiver assembly mounted on console with casters 

      ? Monitor post (VESA compatible) 

      ? Operator control keypad 

      ? Emergency off switch 

      ? Internal solenoid operated vacuum valve

       ? Vacuum On/Off can be automatically controlled from the test program 

      ? Pre-wired for networking 

      ? Instruction Manual in electronic format (PDF)
      Typical System Options 

      ? 1U rack-mount PC with keyboard, monitor and mouse 

      ? CheckSum test system chassis with USB connection

      ? CheckSum in-circuit and functional test modules 

      ? Programmable power supply plus extra power supply option, 0-60V, 12.5A
      Vacuum Connection 

      ? Typical vacuum requirements: 18 to 25 inches of mercury (61 to 85 kPa). Typical test heads require approximately 20 - 25 CFM.

       ? Vacuum Connection: 1? inch (318 mm) ID Hose 

      ? Front panel vacuum gauge
      System :

      ? 24 inches (51 cm) wide front, 30 inches (77 cm) deep side, 31.5 inches (80 cm) high to the top base plate and 40 inches (102 cm) high to tallest portion of the ? xture receiver. The monitor post is 26.5 inches (68 cm) high and the mid-point of the monitor is 30.5 inches (78 cm) above the base plate. Exclusive of any test head. Rack space available for future add-ons.

       ? The keyboard drawer extends out up to 26 inches (66 cm).

       ? Weight: Approximately 225 lb (102 kg), without packing materials.

       ? Standard banana plug for ESD ground and single-point probe.

       ? 98 - 240 VAC, single-phase line voltage.

       ? 1-year limited parts and labor warranty. 

      ? The test system operating temperature range is 0°C to +35°C with 0 to 80% RH (without condensation). Rated accuracy at ±10°C from calibration temperature. Maximum altitude for operation is 3000m (9843 ft.).
      Optional TR-3-Console Test Head Kits 

      ? Base Assembly

       ? Probe and Diaphragm Plates 

      ? Top Rubber Plate

       ? Gas Shock or Spring 

      ? Dress Frame 

      ? Kit sizes - such as:

       ? 12 x 16 inches (30.5 x 40.6 cm) 

      ? 16 x 20 inches (40.6 x 50.8 cm) 

      ? 20 x 24 inches (50.8 x 60.96 cm) 

      ? Internal depth: 2.5 inches (635 mm) 

      ? Overall depth: 4 inches (10.2 cm) 

      ? Typical usable size: Nominal dimensions less 4 inches (10.2 cm)

      免费AV永久免费网址